2" AVT® Rotary Hammer, accepts SDS-MAX bits
Model HR5210C
Anti-Vibration Technology for 2X Less Vibration
  • Powerful 15 AMP motor delivers 14.8 ft.lbs. of impact energy to handle the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • Extended life brushes are longer for more work between service intervals and less downtime
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • 16 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes
  • Lock-on switch for continuous operation ("Hammering Only" mode)
  • Rubberized ergonomic soft grip provides more comfort and control
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

    • (1) Side Handle (158057-6)
    • (1) D-handle (417003-1)
    • (1) Depth Gauge (321248-4)
    • (1) Hammer Bit Grease (194683-7)
    • (1) Plastic Tool Case (158275-6)
    Capacity (concrete drilling)    2" 
    No Load Speed (variable speed)    130 - 260 RPM 
    Blows Per Minute (variable speed)    1,075 - 2,150 BPM 
    Impact Energy (ft.lbs.)    14.8 ft.lbs. 
    Impact Energy (Joules)    20 J 
    AMPS    15 
    Bit Type    Accepts SDS-MAX 
    Overall Length    23-1/2" 
    Net Weight    26.6 lbs. 
    Shipping Weight    29 lbs. 
    UPC Code    088381-081313 

    Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
    The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
    Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.