1-9/16" AVT® Rotary Hammer, accepts SDS-MAX bits
Model HR4013C
Accepts SDS-MAX Bits, Variable Speed, Electronic Controller
  • Powerful 11 AMP motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
  • Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
  • Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
  • Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
  • Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Chipping Only" or "Hammering with Rotation"
  • 24 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes

  • INCLUDES:
    • (1) D-Handle Assembly, HR4013C (196792-8)
    • (1) DEPTH ROD, HR4013C (331955-1)
    • (1) Side Handle Assembly (123138-5)
    • (1) Hammer Bit Grease (194683-7)
    • (1) CLOTH F/WIPING OIL (443122-7)
    AMPS    11 
    Capacity (concrete)    1-9/16" 
    Impact Energy (Joules)    11.4 J 
    Blows Per Minute (variable speed)    1,450 - 2,900 BPM 
    Bit Type    Accepts SDS-MAX 
    Overall Length    18-11/16" 
    Cord Length (ft)    15.6' 
    Net Weight    15.1 lbs. 
    Shipping Weight    27.8 lbs. 
    UPC Code    088381651325 
    Additional Attachments Included    No 
    Blow Energy (ft.-lb.)    8.4 
    Case Included    Yes 
    Chuck Type    Accepts SDS-MAX 
    Clamshell/Jam Pot    Neither 
    Clutch Setting    2-Mode Operation: hammering with rotation and hammering only 
    Color Family    Teal 
    Corded Tool Type    Hammer drill 
    Cordless/Corded    Corded 
    Forward/Reverse Switch    No 
    Manufacturer Warranty    1-year warranty 
    Power Tool Product Type    Corded 
    Product Depth (in.)    18.68" 
    Product Height (in.)    10.375" 
    Product Weight (lb.)    15.1 lbs. 
    Product Width (in.)    4.375" 
    Reconditioned    No 
    Side Handle    Yes 
    Tools Product Type    Power tool 
    UL Listed    1-UL Listed 
    Variable Speed    Yes 
    Voltage (volts)    120V 

    Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
    The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
    Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.