|
|
|
|
 |
|
|
|
|
1" D-Handle Rotary Hammer; Accepts SDS-PLUS Bits
|
|
Model:
HR2475
|
|
Powerful 7.0 AMP Motor
|
|
|
|
Powerful 7.0 AMP motor delivers 0-1,100 RPM & 0-4,500 BPM for the most demanding applications
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
Extended life brushes are longer for more work between service intervals and less downtime
40 bit angle settings allow the bit to be set at different positions for operating convenience
3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
Ergonomic D-shaped handle with rubberized soft grip for increased comfort and control
One-touch sliding chuck for quick bit changes
"No hammering when idling" function helps increase tool life
Recessed lock-on button for continuous use
Accepts SDS-PLUS bits
|
INCLUDES: |
-
Side Handle (158057-6)
-
Depth Gauge (324219-0)
-
Tool Case
|
|
Capacity |
Concrete |
1" |
|
|
Steel |
1/2" |
|
|
Wood |
1-1/4" |
|
No Load Speed |
|
0 - 1,100 RPM |
|
Blows per Minute |
|
0 - 4,500 BPM |
|
Impact Energy |
|
2.7 Joules |
|
|
|
2.0 ft.lbs. |
|
AMPS (120V) |
|
7.0 |
|
Bit Type |
|
Accepts SDS-PLUS Bits |
|
Overall Length |
|
16-7/8" |
|
Net Weight (lbs.) |
|
6.6 |
|
Shipping Weight (lbs.) |
|
11.9 |
|
UPC Code |
|
088381-603508 |
|
|
|
|
|
|
|
|
 |
|
|
|
Copyright ©
2013
Makita U.S.A., Inc. All Rights Reserved - 14930 Northam St., La Mirada, CA 90638,
USA (714) 522-8088
|
Privacy Policy
Terms of Service |
|
Trademarks: Makita®, LXT®, AVT® and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita.
The other trademarks, service marks and logos displayed in the Website are registered and unregistered trademarks of Makita and others.
Nothing contained on this Makita site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed on this site without the written permission of Makita or such third party that owns the trademark.
|
|