Makita U.S.A. General Catalog - page 69

makitatools.com
Pneumatics
>
COMPRESSORS / NAILERS
Low Noise,Low AMP Draw
and High Output
Pump Runs at Lower RPM Resulting
in Lower Noise (79dB)
Drives 3-1/2" x .162" (16d) Nails
• Cast iron pump with Big Bore™ cylinder and piston is
engineered to provide faster recovery time for
improved performance
• Powerful 2.0 HP* 4-Pole motor produces 3.3 CFM at
90 PSI for increased productivity and lower noise
• Pump runs at lower RPM (1,730) resulting in lower
noise (80dB) and improved pump durability
• Cast iron pump with Big Bore™ cylinder and piston is
engineered to provide faster recovery time for
improved performance
• Powerful 2.5 HP* 4-Pole motor produces 4.2 CFM at 90
PSI for increased productivity and lower noise
• Roll-cage construction provides complete protection to
withstand extreme jobsite environments
• 3-Mode selector switch (contact,sequential,lock)
allows user control over nailing options
• Large capacity air chamber for increased power to
drive nails varying in length from 2" to 3-1/2"
• Built-in air filter minimizes dust and debris from
entering tool
• To prevent "dry" nailing,tool is engineered to stop
when three nails remain in the magazine
• Solid rear loading aluminum magazine for longer life
2.0 HP* Air Compressor
2.5 HP* Air Compressor
3-1/2" Framing Nailer
MAC700
MAC2400
AN923
Maximum horsepower*
2.0 HP
Running horsepower
1.7 HP
Pump
Oil-lubricated
Tank
2.6 gal.“Hot-Dog”
Performance
40 PSI (3.8 CFM),90 PSI (3.3 CFM)
Maximum pressure
130 PSI
Net weight
52.0 lbs.
Shipping weight
60.5 lbs.
Maximum horsepower*
2.5 HP
Running horsepower
2.1 HP
Pump
Oil-lubricated
Tank
4.2 gal.Twin stacked
Performance
40 PSI (4.8 CFM),90 PSI (4.2 CFM)
Maximum pressure
130 PSI
Net weight
77.0 lbs.
Shipping weight
86.3 lbs.
Operating air pressure
65-120 PSI
Nail size:
2" to 3-1/2"
.113" - .162" Shank diameter
plastic or wire collated
Magazine capacity
64-74
Dim.(LxWxH)
22" x 4-1/4" x 13-11/16"
Net weight
8.7 lbs.
Shipping weight
12.1 lbs.
Model MAC700 Includes:
Compressor oil (1 quart)
(181122-A),1/4" Universal quick coupler (447013-E)
Model MAC2400 Includes:
Compressoroil(1quart)
(181122-A),2ea.1/4"Universalquickcoupler(447013-E)
Model AN923 Includes:
Oil supply (181434-7), Hook
(122742-7),Safety goggles
The Most Powerful Nailer in its Class
• 3-mode selector switch (contact,sequential,lock)
allows user control over nailing options
• Built-in air filter minimizes dust and debris from
entering tool
• Sharp,pronounced spurs grip wood for controlled
nailing at an angle
• Easy loading canister with nail size adjustment
• “Tool-less”depth adjustment with 9 depth settings
3-1/2'' Framing Coil Nailer
AN901
Operating air pressure
65-120 PSI
Nail size:
1-3/4" to 3-1/2"
.099" - .148" Shank diameter
plastic or wire collated
Magazine capacity
150-300
Dim.( LxWxH)
12-1/2'' x 5-1/8" x 16"
Net weight
7.0 lbs.
Shipping weight
9.2 lbs.
Model AN901 Includes:
Hex wrench 4 (783202-0),
No-mar tip (421658-6),Oil supply (181434-7),
Safety goggles
Maximum horsepower*
3.0 HP
Running horsepower
2.1 HP
Pump
Oil-lubricated
Tank
5.2 gal.Single
Performance
40 PSI (6.9 CFM),90 PSI (6.5 CFM)
Maximum pressure
140 PSI
Net weight
88.0 lbs.
Shipping weight
107.0 lbs.
Model MAC5200 Includes:
Compressor oil (1 quart)
(181122-A),2 ea.1/4" Universal quick coupler (447013-E)
Powerful Enough to Run Two
Framing Nailers
• Cast iron pump with Big Bore™ cylinder and piston is
engineered to provide faster recovery time for
improved performance
• Powerful 3.0 HP* motor produces 6.5 CFM at 90 PSI for
increased productivity
• Pump is oil lubricated for cooler running temperatures
and reduced wear
• Durable cast iron cylinder reduces wear and increases
pump life
3.0 HP* Air Compressor
MAC5200
Powerful 3.0HP*
motor produces
6.5 CFM at 90PSI
for increased
productivity
PERFORMANCE
“Tool-less”Depth Adjustment with
9Settings
• “Tool-less”depth adjustment engineered for more
precise flush and countersink nailing
• 3-mode selector switch (contact,sequential,lock)
allows user control over nailing options
• Built-in air filter minimizes dust and debris from
entering tool
• Multi-directional exhaust port directs exhaust air away
from user
2-1/2" Siding Coil Nailer
AN611
Operating air pressure
65-120 PSI
Nail size:
1-1/4" to 2-1/2"
.080" - .099" Shank diameter
plastic or wire collated
Magazine capacity
200 - 400
Dimensions (LxWxH)
13-1/16" x 5" x 12-1/2"
Net weight
5.1 lbs.
Shipping weight
6.3 lbs.
Model AN611 Includes:
Hex wrench 4 (783202-0),
Oil supply (181434-7),Safety goggles,Tool case
MORE DURABILITY
FASTER RECOVER TIME
less noise
1
3
2
4
Makita Induction
Motors are built to
last and provide
longer durability
than universal motors
used by other
manufacturers
Makita 4-Pole Motors**
run at lower RPM
(1,730) than competitive
models resulting in lower
noise and longer motor
and pump durability
**MAC700 & MAC2400 only
Makita Pumps are
built with cast iron
cylinders and large
pistons for greater
durability and faster
recovery time
Advantages
ofMakita
Air Compressors
68 - 69
PNEUMATICS
Front Cover...,59,60,61,62,63,64,65,66,67,68 70,71,72,73,74,75,76,77,78,79,...Back Cover
Powered by FlippingBook