Makita U.S.A. Product Catalog - page 40

40
|
CONCRETE
2'' ROTARY HAMMER
Air Cushion Design for Hard
Hitting Action
All ball-and-needle bearing construction for longer
tool life
Powerful 11 AMP motor for the most demanding applications
Built-in clutch reduces gear damage by disengaging
gears if the bit binds
2-mode operation for "Hammering Only" or
"Hammering with Rotation" for multiple applications
Sequential impact timing delivers timed hammering
during rotation to minimize overlapping bit impacts
resulting in up to 50% faster drilling
Model HR5000 Includes:
Hex Wrench (783202-0),
Hex Wrench (783203-8),Wrench (783204-6),Tool Case
HR5000
AMPS
11
Capacities: Concrete Drilling
2"
Concrete Drilling w/ Core Bit
5-7/8"
Impact Energy
11.8 J / 8.7 ft.lbs.
Vibration (m/s²)
25
Blows Per Minute
2,100 BPM
No Load Speed
260 RPM
Overall Length
18-3/4"
Cord Length (ft)
8.2'
Net Weight
21.8 lbs.
Shipping Weight
35 lbs.
Bit Type
Accepts Spline shank
1-9/16" ROTARY HAMMER
Electronic Controller for Operator
Convenience
Powerful 12 AMP motor delivers 6.8 ft.lbs. of impact energy
Constant speed control automatically applies additional
power to the motor to maintain speed under load
Soft start suppresses start-up reaction for increased
accuracy
Variable speed control dial enables user to match the
speed to the application
"No hammering while idling" helps increase tool life.
Torque limiting clutch engineered to prevent gear
damage by automatically disengaging gears
Model HR4041C Includes:
Depth Gauge (321248-4),
Side Handle (416549-4),Tool Case
HR4041C
AMPS
12
Capacities: Concrete Drilling
1-9/16"
Concrete Drilling w/ Core Bit
4-5/8"
Impact Energy
9.2 J / 6.8 ft.lbs.
Vibration (m/s²)
15
Blows Per Minute (variable speed)
1,300 - 2,600 BPM
No Load Speed (variable speed)
230 - 460 RPM
Overall Length
16-7/8"
Cord Length (ft)
16.4'
Net Weight
14.8 lbs.
Shipping Weight
20.3 lbs.
Bit Type
Accepts Spline shank
1-1/4" AVT
®
ROTARY HAMMER
Anti-Vibration Technology for
2X Less Vibration
Powerful 8.2 AMP motor delivers 4.7 ft.lbs. of impact
energy
Constant speed control automatically applies additional
power to the motor to maintain speed under load
Soft start suppresses start-up reaction for more
precision and better accuracy
L.E.D. service light notifies the user approximately
8 hours before the brushes need to be replaced
L.E.D. power light indicates switch failure or cord damage
Model HR3210C Includes:
Side Handle (151769-0),
Depth Gauge (321248-4), Hammer Bit Grease (194683-7),
Tool Case
HR3210C
AMPS
8.2
Capacities: Concrete Drilling
1-1/4"
Concrete Drilling w/ Core Bit
3-1/2"
Impact Energy
5.5 J / 4.1 ft.lbs.
Vibration (m/s²)
10
Blows Per Minute (variable speed)
1,650 - 3,300 BPM
No Load Speed (variable speed)
315 - 630 RPM
Overall Length
15-5/8"
Cord Length (ft)
16.4'
Net Weight
11.4 lbs.
Shipping Weight
19.84 lbs.
Bit Type
Accepts SDS-PLUS
1-1/8'' ROTARY HAMMER
Torque Limiting Clutch Engineered to
Prevent Gear Damage
Powerful 7.0 AMP motor delivers 2.1 ft.lbs. of impact energy
L.E.D. light illuminates drilling surface for more
productivity in low light applications
3-mode operation for "Rotation Only", "Hammering
with Rotation" or "Hammering Only"
"No hammering when idling" function helps increase
tool life
Ergonomic "D-shaped" handle with rubberized soft
grip for increased comfort
Model HR2811F Includes:
Depth Gauge (324219-0),
Side Handle (154842-5),Tool Case
HR2811F
AMPS
7
Capacities: Concrete Drilling
1-1/8"
Concrete Drilling w/ Core Bit
3-1/8"
Impact Energy
2.9 J / 2.1
Vibration (m/s²)
15
Blows Per Minute (variable speed)
0 - 4,500 BPM
No Load Speed (variable speed)
0 - 1,100 RPM
Overall Length
12-5/8"
Cord Length (ft)
8.2'
Net Weight
7.7 lbs.
Shipping Weight
11.8 lbs.
Bit Type
Accepts SDS-PLUS
1" AVT
®
ROTARY HAMMER
Anti-Vibration Technology for
2X Less Vibration
Powerful 8 AMP motor delivers 2.1 ft.lbs./2.9 J. of
impact energy
Anti-Vibration Technology (AVT
®
) is an internal
counterbalance system and impact bolt damper spring
that greatly reduces vibration
Torque limiting clutch engineered to prevent gear damage
Recessed 3-mode function selector is located below
gear housing for improved durability
Retractable tool hook secures the tool when not in use
Model HR2641 Includes:
Handle, LXFD01CW (451749-9),
Depth Gauge, HR2611F, HR2621 (331886-4),Tool Case
HR2641
AMPS
8
Capacities: Concrete Drilling
1"
Concrete Drilling w/ Core Bit
3-1/8"
Impact Energy
2.9 J / 2.1 ft.lbs.
Vibration (m/s²)
11.5
Blows Per Minute (variable speed)
0 - 4,500 BPM
No Load Speed (variable speed)
0 - 1,100 RPM
Overall Length
16-5/8"
Cord Length (ft)
13.1'
Net Weight
7.1 lbs.
Shipping Weight
11.55 lbs.
Bit Type
Accepts SDS-PLUS
1" ROTARY HAMMER
Torque Limiting Clutch Engineered to
Prevent Gear Damage
Powerful 7.0 AMP motor delivers 2 ft.lbs. of impact energy
3-mode operation for "Rotation Only", "Hammering with
Rotation" or "Hammering Only"
Variable speed trigger enables user to match the
speed to the application for greater versatility
Ergonomic "D-shaped" handle with rubberized soft
grip for increased comfort
One-touch sliding chuck for quick bit changes
Model HR2475 Includes:
Side Handle (158057-6),
Depth Gauge (324219-0),Tool Case
HR2475
AMPS
7
Capacities: Concrete Drilling
1"
Concrete Drilling w/ Core Bit
3-1/8"
Impact Energy
2.7 J / 2
Vibration (m/s²)
15.5
Blows Per Minute (variable speed)
0 - 4,500 BPM
No Load Speed (variable speed)
0 - 1,100 RPM
Overall Length
16-7/8"
Cord Length (ft)
13.1'
Net Weight
6.6 lbs.
Shipping Weight
11.9 lbs.
Bit Type
Accepts SDS-PLUS
1" AVT
®
ROTARY HAMMER,
ACCEPTS SDS-PLUS
Anti-Vibration Technology for 2X Less
Vibration
Powerful 7 AMP motor delivers 2.1 ft.lbs. of impact
energy to handle the most demanding applications
Anti-Vibration Technology (AVT
®
) is an internal
counterbalance system that greatly reduces vibration
Integrated damper spring at the base of the impact bolt is
engineered to absorb impact vibrations from the drill bit
L.E.D. light illuminates drilling surface for more
productivity in low light applications
Recessed hammer function selector located below
gear housing for improved durability
Model HR2611F Includes:
Handle,LXFD01CW (451749-9),
Depth Gauge, HR2611F, HR2621 (331886-4),Tool Case
HR2611F
AMPS
7
Capacities: Concrete Drilling
1"
Concrete Drilling w/ Core Bit
2-11/16"
Impact Energy
2.9 J / 2.1 ft.lbs.
Vibration (m/s²)
11.5
Blows Per Minute (variable speed)
0 - 4,600 BPM
No Load Speed (variable speed)
0 - 1,200 RPM
Overall Length
15-1/8"
Cord Length (ft)
13.1'
Net Weight
6.6 lbs.
Shipping Weight
11.7 lbs.
Bit Type
Accepts SDS-PLUS
11/16" ROTARY HAMMER
Compact with Less Weight (4.2 lbs.)
Powerful 4.2 AMP motor delivers .9 ft.lbs. of impact energy
L.E.D. light illuminates drilling surface for more
productivity in low light applications
Torque limiting clutch engineered to prevent gear damage
2-mode operation for "Rotation Only", "Hammering
with Rotation"
One-touch sliding chuck for quick bit changes
Model HR1830F Includes:
Depth Gauge (415486-9),
Side Handle (154842-5),Tool Case
HR1830F
AMPS
4.2
Capacities: Concrete Drilling
11/16"
Concrete Drilling w/ Core Bit
Impact Energy
1.2 J, .9 ft.lbs.
Vibration (m/s²)
14
Blows Per Minute (variable speed)
0 - 5,000 BPM
No Load Speed (variable speed)
0 - 1,500 RPM
Overall Length
10-7/8"
Cord Length (ft)
8.2'
Net Weight
4.2 lbs.
Shipping Weight
11 lbs.
Bit Type
Accepts SDS-PLUS
Concrete >
ROTARY HAMMERS
MakitaToolsPage
MakitaTools
MakitaPowerTools
MakitaTools
LED
LED
LED
LED
Front Cover...,30,31,32,33,34,35,36,37,38,39 41,42,43,44,45,46,47,48,49,50,...132
Powered by FlippingBook